Triple Bottle Reinforced Stack – Hydrostatic Test

We have had our triple bottle stack of reinforced bottles ready for a while to hydrostatic test and finally got around to it this week.

Each bottle in the triple stack is reinforced using this method.  We had previously hydrostatic tested individual reinforced bottles to 180psi but not a stack of them. The 3 bottles in the stack are held together using robinson couplings.

Hydrostatic Test of reinforced stack

Our goal was to hydro test to 180psi. The bottles were filled with water, safety glasses were put on and being well back we pumped up to 180psi. This was a pic we took which says 177psi but we did put a few more psi in it to be sure we got to the 180psi. We left it for about 30 seconds before releasing the pressure with the abort valve.

177psi or 12bar

We didnt see any leaks which was good, so it was a successful test.

The triple stack has been fitted to the water rocket car ready for a test run. Based on the success of the last launch day we will probably need to fit a parachute to the car to slow it down, so we will turn our attention to that next.

Tags: , , ,

This entry was posted on Friday, August 20th, 2010 at 8:10 am and is filed under Development. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

 
 

Comments are closed.